Xomax XM-DTSB913

Xomax XM-DTSB913 handleiding

(1)
  • INSTALLATION/OWNER’S MANUAL
    DVD Multimedia Receiver with 7” Touch Screen Display
    XM-DTSB9 13
    -4-
    -5-
    -6- -7-
    -8-
    Theunit can play the following discs only
    Note: The unit is compatible with DVD, DVD+/-R, VCD 1.0/2.0/3.0, SVCD, CD, CD-R, CD-RW and JPEG
    CLASS 1 LASER PRODUCT
    Laser porDuct symbol: located on the rear panl of the unit, indicate this player is a class laser product, only
    use weak laser and on hazardous radiatian outside of the unit.
    ● Read through this instruction manual before installation and use.
    ● Do not touch the power plug with wet hand.
    ● Switch off the main power when the unit is not in use. (Disconnect the power pulg from the power outlet
    when you do not intend to use the unit for a prolonged period of time). Before moving the unit, remove the
    disc from the unit/tray first.
    ● Do not open the cover or touch any of the components exposed out of the unit, only for qualified
    technicians.
    ● Do not expose the unit under direct sunlight oe nearby objects that radiate heat to avoid damaging the unit.
    ● Do not place the unit in moist and humdi conditions.
    ● Place the unit on a flat surface and ventilative condition, place ensure the ventilation holes are not covered
    to avoid overheating acd malfunciton.
    ● Clear the panel and case with soft dry cloth only, do notaooly any kind of thinner, alcohol or sprays.
    The apparatus shall not exposed to dripping or splashing and that no objects filled with liquids, such as
    vases shall be placed on the apparatus.
    1. TFT-LCD Display
    2. Disc Slot
    3. AV IN Insterface
    4. 2/OSC Button
    5. 1/PAUSE Button
    6. 3/MENU Button
    7. 4/REPEAT Button
    8. Fast Forward Button/Previous Track
    9. Fast Reverse Button/Next Track
    10. 6/+10 Button (CD MP3 VCD) Manual Tuning
    11. Disc Lamp
    12. 5/-10 Button (CD MP3 VCD) Manual Tuning
    13. Audio Volume/SEL Button
    14. BAND (OFF Phone) Button
    15. LCD Display
    16. Release Key
    17. OPEN Button
    18. EJECT Button
    19. Power/TFT ON/OFF (OFF) Phone Button
    20. USB Socket
    21. SD Card Slot
    Precautions
    Replace the Battery
    When the operational range of the remote control becomes short or non-functional, replave battery with a
    new CR2025 battery. Check the battery polarity before replavement.
    Replace the Battery of IR Handset
    Notes on installationContents
    -3-
    Control Panel Layout Remote Control Layout Wiring Diagram Basic Operation
    AUX&IPOD Operation
    -9-
    Multimedia Playing Setup
    (system setup menu)
    Multimedia Playing Setup
    (system setup mode)
    -10- -11-
    Initial System Starts Up
    Turning the Unit ON/OFF
    Volume Control
    Mute Function
    Menu Function
    Display Setup
    Audio Setup
    IR Sensor
    Press RESET button with a pointed object to set the unit to its initial
    procedure
    Short press Power to turn on. Long press to turn off
    Press VOLUME+/-
    Press MUTE
    Press Menu
    Click icon to access the System
    Default setup
    Click icon to access the EQ
    setup
    Reveiver for wireless IR remote control
    Radio Operation
    1. Touch the radio icon in the main menu display screen to select radio mode.
    2. Touch the icon “BAND” repeatedly to select bands.
    3. Touch the icon “APS” or press key in IR handsct shortly to activatc automatic memory storing
    function.
    4. Press or or icon shortly to manually seek the radio station.
    5. Long press or or icon to automatically seek the radio station.
    6. Touch the frequency bar in the display screen to select preset memory station.
    7. Long press icon “APS” to scan each preset memory station for 10Seconds.
    8. Touch the icon “ST” or Press ST key in IR handset to set stereo or mono receiving mode.
    -12-
    -14-
    Install the unit (DIN front mount)
    -15-
    -16-
    DIN FRONT-MOUNT (method A)
    Specification
    DIN REAR MOUNT(method B)
    -17-
    Install and Remove the Front Panel
    -13-
    -2-
    Note on installation -------------------------------------------------------- 3
    Precautions ------------------------------------------------------------------ 4
    Control Panel Layout ------------------------------------------------------ 5
    Remote Control Layout --------------------------------------------------- 6
    Wiring Diagram ------------------------------------------------------------- 7
    Basic Operation ------------------------------------------------------------ 8
    Multimedia Playing Setup ----------------------------------------------- 9
    Replace the Battery of IR Handset ----------------------------------- 13
    Install the unit -------------------------------------------------------------- 14
    Specification ---------------------------------------------------------------- 16
    The unit is designed for 12V DC, negative ground operation systems only. Before installing the unit, make
    sure your vehicle is connected to 12V DC negative grounded electrical system.
    The negative battery terminal must be disconnected befor making connections which can prevent damage to
    the unit from short circuiting.
    Be sure to connect the correct speaker to the correct terminal. Never connect the left and right channel
    speaker cables to each other or to the vehicle body. Do not blovk vents or radiator panels. Doing so will
    cause heat to build up and may result in fire.
    After completion of installation and replacement of battery, press the reset button on the front panel with a
    pointed object (such as a ball point pen) to set the unit to its initial status.
    1. Press SETUP key in IR handset in the stop mode when playing
    multimedia.
    2. The main page of setup menu is displayed.
    3. Select the preferred item by using the arrow keys.
    4. Press ENTER key to confirm setting.
    Enter Setup Model
    Selet restore to restore initial factory settings.
    This setuo page includes OSD language. Audio language and Menu
    Language features.
    This setuo page includes all the items for AUDIO.
    SPDIFOFF:
    Analog or optical outout port has no output signalatall.
    SPDIF PCM:
    Select this when the player is connected whit the 2 channels, digital
    seereo amplifier. If the disc is recorede in Digital or MPEG, the
    analog optical output will be modulated to 2 channels.
    This is to select Treble or Bass according to yourNeeds.
    This is for the user to set Brightness, Contrast, Hue and Saturation of the
    picture by pressing the left right arrow buttons.
    This setup page includes all the items for VIDEO.
    Default Setup
    Menu
    Language Setup
    AUDIO Setup
    Audio Out Setup
    Key Setup Menu
    Video Setup
    Operating Current: 600MA
    Operating Voltage: DC: 10V-15.7V
    Max. Power Output: 45W*4CH
    Rated Power: 1W
    Dimensions: Approx. 182*160*53mm (D*W*H)
    Mounting Dimensions: Approx. 160*180*50mm (D*W*H)
    Signal Amplitude: 1V
    Remote Contro: IR/IR Receiver
    POWER IC: TDA7388
    Decoding IC: SHE8202TQ
    Screen drive IC: MST-703
    Colour: Black Front Panel/White Text Pringting Button/Yellow Text Prining
    Disc played: Multi Media
    Video System: Auto/PAL/NTSC
    Mounting Angle: 0-30 degree
    Viewing Angle: 60/60/40/60 (TYP)
    Operating Temperature: +50-20°
    Storage Temperature: +80-40°
    Screen Size: 164.9MM(W)*100(H)*5.7MM(D) 7″Colour Screen
    Viewing Angle: 60/60/40/60(TYP)
    Screen Resolution: 480(W)*3 (RGB)*234(H)
    Screen Brightness: 350cd/m2
    RCA Maximum Output: 520MV
    Frequency Response: 20Hz-20K Hz
    Signal to Noiseration: 85dB
    Separation: 80dB
    AUX Input: 750MV
    General
    Multi Media
    Deek Section
    Video Section
    Audio Section
    Tuning Range: 87.5-107.9MHz
    IF Range: 10.7MHz
    Usable Sensitivity (-30dB): 12dBu
    Signal to Noiseratio: 60dB
    Stereo Separation: 30dB (1KHz)
    Frequency Response: 30-15KHz
    Frequency Range: 530-1710KHz
    IF Range: 450KHz
    Usable Sensitiveity (-20dB): 25dBu
    FM Tuner Section
    AM Tuner Section
    1. Press the icon to enter main menu display screen.
    2. You can touch icon”AV-IN” to switch to your desirde av-in mode.
    AV-IN Operation
    Rating 1 :[KID SAFE]
    Select this for kid-safe viewing programs.
    Rating 2:[G]
    Select this to allow admission to persons of all ages.
    Rating 3:[PG]
    Select following when children under 13 are forbidden to view.
    Rating 4:[PG13]
    Select following when children under 13 are forbidden to view.
    Rating 5:[PG-R]
    Select this when PG-R is printed on the DVD disc.
    Rating 6:[R]
    Select this when children under 17 are forbidden to view.
    Rating 7:[NC 17]
    Select this when children under 17 are forbidden to view.
    Rating 8:[ADULT]
    Select this ti only allow admission to all adults.
    Rating Setup
    Menu
    The setup page includes TV system, screen saver, TV type, password,
    rating&default features.
    This player can play discs recorded in either PAL or NTSC format. Select
    NTSC format when you are connected to NTSC TV. Select PAL format
    when you are connected to PAL TV. If you select AUTO, according to
    your disc content.
    1. 4:3 PS
    Playback in the PAN&SCAN style. (If connected to widc-screen TV, the
    left and right edges are cut off).
    2. 4:3 LB
    Playback in LETER BOX style. (If connected to wide-screen TV, black
    bands appear at top and botton of the screen).
    3. 16:9
    Select when a wide-screen TV set is connected.
    System Setup
    TV System Menu
    Video System Menu
    TV Type
    Setup Menu
    Installing the Unit
    1. Dashboard
    2. Holder
    After inserting the holder into the dasrwhboard, select
    the appropriate tab according to the thickness of the
    dashboard material and bend them inwards to secure
    the holder in place.
    3. Screw
    1. Dashboard
    2. Nut (5mm)
    3. Plan washer
    4. Screw (5*25mm)
    5. Screw
    6. Starp be sure to use the starp to secure the back of
    the unit in place.The starp can be bent by hand to the
    desired angle.
    7. Plain Washer
    Remove the Unit
    1. Frame
    2. Insert fingers into the groove in the front of frame and
    pull out to remove the frame. (When reattaching the
    frame,point the side with a groove downwards and
    attach it).
    3. Lever
    Insert the levers supplied with the unit into the grooves
    at both sides of the unit as shown in figure until they
    click. Pulling the levers makes it possible to remove the
    unit from the dashboard.
    Installation using the screw holes on the sides of the
    Unit.
    Fastening the unit to the factory radio mounting
    bracket.
    1. Select a position where the screw holes of the bracket
    and the screw holes of the main unit become aligned
    (are fitted) and tighten the screw at 2 places on each
    side.Use either truss screws (5*5 mm) or flush surface
    screw (4*5 mm).
    2. Screw(“T”Position).
    3. Dashboard or Console.
    Note: The mounting box,outer trim ring,and half-sleeve
    are not used for method B installation.
    Pull out the battery holder while pressing the stopper 1.
    Place battery whth (+) mark facing up into the battery
    holder.
    Insert the battery holder into the remote controller.
    Remove the front panel
    Press”PWR”button in the upper left corner.
    Please see picture 1
    Press “REL”button in the and the pull it out.
    Please see picture 2
    Install the front panel
    Put notch A (shown as picture) onto buckle B, and then
    slightly press into the right side.
    Note: Please don’t insert finger in control panel.If
    connector is dirty.use a clean soft cloth to wipe it clean.
    1. Power on/off
    2. MODE
    3. PLAY/PAUSE
    4. MUTE
    5. TITLE
    6. SUB-T
    7. RIGHT
    8. SETUP
    9. ANGLE
    10. SLOW
    11. VOL+
    12. ZOOM
    13. SEL
    14. SEEK+/
    15. VOL-
    16. AUDIO
    17. Number keys
    18. GOTO
    19. PBC
    20. OSD
    21. LOC RDM
    22. SEEK-/
    23. AMS PRT
    24. ST/PROG
    25. STOP/BACK
    26. DOWN
    27. LEFT
    28. ENTER
    29. BAN/SYS
    30. UP
    BAN
    SYS
    ST
    PROG
    AMS
    PRT
    LOC
    RDM
    TITLE
    MODEPOW MUTE
    SUB-T
    ENTER
    SEEK- SEEK+
    SEL
    PBC
    1 2 3 4
    5 6 7 8
    9 10 10+
    GOTO
    VOL- AUDIOOSD
    SETUP
    VOL+ ZOOM
    SLOWANGLE
    1 2
    3 4
    9
    10
    11
    12
    13
    14
    15
    16
    18
    5
    6
    7
    8
    17
    17
    19
    20
    21
    22
    23
    24
    25
    26
    27
    28
    29
    30
Xomax XM-DTSB913

Hulp nodig?

Aantal vragen: 0

Heeft u een vraag over de Xomax XM-DTSB913 of heeft u hulp nodig? Stel hier je vraag. Zorg voor een duidelijke en uitgebreide omschrijving van het probleem en je vraag. Hoe beter je probleem en vraag is omschreven, hoe makkelijker het is voor andere Xomax XM-DTSB913 bezitters om je van een goed antwoord te voorzien.

Bekijk hier gratis de handleiding van de Xomax XM-DTSB913. Deze handleiding valt onder de categorie Niet gecategoriseerd en is door 1 mensen gewaardeerd met een gemiddelde van een 5.7. Deze handleiding is beschikbaar in de volgende talen: Engels. Heeft u een vraag over de Xomax XM-DTSB913 of heeft u hulp nodig? Stel hier je vraag

Xomax XM-DTSB913 specificaties

Algemeen
Merk Xomax
Model XM-DTSB913
Product Niet gecategoriseerd
Taal Engels
Bestandstype PDF

Handleidi.ng

Op zoek naar een handleiding? Handleidi.ng zorgt er voor dat je binnen no-time de handleiding vindt die je zoekt. In onze database zitten meer dan 1 miljoen PDF handleidingen van meer dan 10.000 merken. Elke dag voegen wij de nieuwste handleidingen toe zodat je altijd het product zal vinden wat je zoekt. Het is heel eenvoudig: typ in de zoekbalk de merknaam en het type product en je kan direct de handleiding van je keuze gratis online bekijken.

Handleidi.ng

© Copyright 2020 Handleidi.ng. Alle rechten voorbehouden.

We gebruiken cookies om er zeker van te zijn dat je onze website zo goed mogelijk beleeft. Als je deze website blijft gebruiken gaan we ervan uit dat je dat goed vindt.

Meer info