Sony ICF-C1IP handleiding

  • Aantal pagina's: 2
  • Bestandstype: PDF
  • For customers who purchased this product in the
    Please register this product on line at
    Proper registration will enable us to send you
    periodic mailings about new products, services,
    and other important announcements. Registering
    your product will also allow us to contact you in
    the unlikely event that the product needs
    adjustment or modification. Thank you.
    To reduce the risk of fire or electric shock, do
    not expose this apparatus to rain or moisture.
    To reduce the risk of electrical shock, do not
    open the cabinet. Refer servicing to qualified
    personnel only.
    To reduce the risk of fire, do not cover the ventilation
    of the apparatus with newspapers, tablecloths,
    curtains, etc. And do not place lighted candles on the
    The apparatus shall not be exposed to dripping or
    splashing and that no objects filled with liquids, such
    as vases, shall be placed on the apparatus.
    Do not install the appliance in a confined space, such
    as a bookcase or built-in cabinet.
    As the main plug is used to disconnect the unit from
    the mains, connect the unit to an easily accessible AC
    outlet. Should you notice an abnormality in the unit,
    disconnect the main plug from the AC outlet
    You are cautioned that any changes or
    modifications not expressly approved in this manual
    could void your authority to operate this equipment.
    This symbol is intended to alert the
    user to the presence of uninsulated
    “dangerous voltage” within the
    product’s enclosure that may be of
    sufficient magnitude to constitute a
    risk of electric shock to persons.
    This symbol is intended to alert the
    user to the presence of important
    operating and maintenance (servicing)
    instructions in the literature
    accompanying the appliance.
    Class II equipment symbol This symbol
    indicates that the unit has a double
    insulation system.
    This equipment has been tested and found to comply
    with the limits for a Class B digital device, pursuant to
    Part 15 of the FCC Rules. These limits are designed to
    provide reasonable protection against harmful
    interference in a residential installation. This
    equipment generates, uses and can radiate radio
    frequency energy and, if not installed and used in
    accordance with the instructions, may cause harmful
    interference to radio communications. However, there
    is no guarantee that interference will not occur in a
    particular installation. If this equipment does cause
    harmful interference to radio or television reception,
    which can be determined by turning the equipment off
    and on, the user is encouraged to try to correct the
    interference by one or more of the following
    Reorient or relocate the receiving antenna.
    Increase the separation between the equipment
    and receiver.
    Connect the equipment into an outlet on a
    circuit different from that to which the receiver
    is connected.
    Consult the dealer or an experienced radio/TV
    technician for help.
    Danger of explosion if battery is incorrectly
    replaced. Replace only with the same or equivalent
    Replace the battery for the clock backup with a
    Sony CR2032 lithium battery, and the battery for the
    remote commander with a Sony CR2025 lithium
    battery. Use of another battery may present a risk of
    fire or explosion.
    •Battery may explode if mistreated. Do not recharge,
    disassemble or dispose of in fire.
    Do not expose the battery to excessive heat such as
    direct sunlight, fire or the like.
    Dispose of used battery promptly. Keep away from

    FM/AM Clock Radio


    Operating Instructions
    ©2007 Sony Corporation Printed in ChinaImportant Safety Instructions
    1) Read these instructions.
    2) Keep these instructions.
    3) Heed all warnings.
    4) Follow all instructions.
    5) Do not use this apparatus near water.
    6) Clean only with dry cloth.
    7) Do not block any ventilation openings.
    Install in accordance with the manufacturer’s
    8) Do not install near any heat sources such as
    radiators, heat registers, stoves, or other apparatus
    (including amplifiers) that produce heat.
    9) Do not defeat the safety purpose of the polarized
    or grounding-type plug. A polarized plug has two
    blades with one wider than the other. A grounding
    type plug has two blades and a third grounding
    prong. The wide blade or the third prong are
    provided for your safety. If the provided plug does
    not fit into your outlet, consult an electrician for
    replacement of the obsolete outlet.
    10) Protect the power cord from being walked on or
    pinched particularly at plugs, convenience
    receptacles, and the point where they exit from the
    11) Only use attachments/accessories specified by the
    12) Use only with the cart, stand, tripod, bracket, or
    table specified by the manufacturer, or sold with
    the apparatus. When a cart is used, use caution
    when moving the cart/apparatus combination to
    avoid injury from tip-over.
    13) Unplug this apparatus during lightning storms or
    when unused for long periods of time.
    14) Refer all servicing to qualified service personnel.
    Servicing is required when the apparatus has been
    damaged in any way, such as power-supply cord
    or plug is damaged, liquid has been spilled or
    objects have fallen into the apparatus, the
    apparatus has been exposed to rain or moisture,
    does not operate normally, or has been dropped.
    For the state of california, USA only
    Perchlorate Material –special handling may apply, See
    Perchlorate Material: Lithium battery contains


    Dual alarm FM/AM Clock radio with iPod dock.
    •Various type of alarms- iPod, radio and buzzer.
    •Automatic time set — When you plug the clock in
    for the first time, the current time will be shown in
    the display.
    •Automatic Daylight Saving Time/Summer time
    CLOCK button to display month, day and year.
    •Brightness control (High/Middle/Low).
    No Power No Problem alarm system to keep the
    clock and the alarm operating during a power
    interruption with a CR2032 battery installed.


    Should any problem occur with the unit, make the
    following simple checks to determine whether or not
    servicing is required.
    If the problem persists, consult your nearest Sony
    The clock displays “AM 12:00” due to a
    power interruption.
    •The battery is low. Replace the battery. Remove the
    old battery and install a new one.
    When daylight saving time begins, the clock
    does not employ the daylight saving time
    Make sure the clock is set correctly.
    •Press and hold CLOCK and TIME ZONE/ALARM
    DISPLAY simultaneously for at least two seconds
    to employ the DST function.
    The alarm does not sound at the preset alarm
    Has the desired alarm been activated? (i.e., Does the
    ALARM A (or B) indicator light up?)
    The radio or iPod alarm is activated but no
    sound comes on at the preset alarm time.
    Has VOLUME been adjusted?
    There is no sound from the iPod.
    Make sure the iPod is securely connected.
    Adjust the VOLUME.
    The iPod cannot be operated with this unit.
    Make sure the iPod is securely connected.
    The iPod cannot be charged.
    Make sure the iPod is securely connected.
    This unit includes a preinstalled Sony Lithium battery (CR2032) as back-up power source for the clock, which is preset
    to EST/EDT (Eastern Standard Time/Daylight Time) at the factory. And this battery is considered part of the product.
    Dream Machine is a trademark of Sony Corporation.
    No Power No Problem is a trademark of Sony Corporation.

    Connecting the


    To connect the AM loop
    The shape and the length of the antenna is designed to
    receive AM signals. Do not dismantle or roll up the
    1 Remove only the loop part from the plastic
    2 Set up the AM loop antenna.
    3 Connect the cords to the AM antenna
    The cords (A and B) can be connected to either
    Only insert up
    to here.
    4 Make sure the AM loop antenna is
    connected firmly by pulling softly.Adjusting the AM loop antenna
    Find a place and an orientation that provide good
    Do not place the AM loop antenna near the unit or
    other AV equipment, as noise may result.
    If you use an external polarized AM antenna, be
    sure to connect the ground cord to the
    The supplied AM antenna cord has no polarity.
    Adjust the direction of the AM loop antenna for best
    AM broadcast sound.
    Insert the cord whilepushing down theterminal clamp.


    Operate the unit on the power sources specified in
    “Specifications” .
    •To disconnect the power cord (mains lead), pull it
    out by the plug, not the cord.
    •The unit is not disconnected from the AC power
    source (mains) as long as it is connected to the wall
    outlet, even if the unit itself has been turned off.
    Do not leave the unit in a location near a heat
    source, such as a radiator or airduct, or in a place
    subject to direct sunlight, excessive dust,
    mechanical vibration, or shock.
    Allow adequate air circulation to prevent internal
    heat build-up. Do not place the unit on a surface (a
    rug, blanket, etc.) or near materials (a curtain) that
    might block the ventilation holes.
    Should any solid object or liquid fall into the unit,
    unplug the unit and have it checked by qualified
    personnel before operating it any further.
    •To clean the casing, use a soft cloth dampened with
    a mild detergent solution.
    •Wipe the battery with a dry cloth to assure a good
    Be sure to observe the correct polarity when
    installing the battery.
    Do not hold the battery with metallic tweezers,
    otherwise a short-circuit may occur.
    If you have any questions or problems
    concerning your unit, please consult your
    nearest Sony dealer.


    Time display
    12-hour System
    Frequency range
    Band Frequency Channel step
    FM 87.5 – 108 MHz 0.1 MHz
    AM 530 – 1 710 kHz 10 KHz
    Approx. 5.1 cm (2 inches) dia., 12
    Power output
    3 W + 3 W (at 10% harmonic distortion)
    Power requirements
    120 V AC, 60 Hz
    For clock backup: 3 V DC, one CR2032 battery
    Approx. 300 × 130 × 139 mm (w/h/d)
    /16 × 5
    /8 × 5
    /2 inches) incl. projecting parts
    and controls
    Approx. 1.86 kg (4 lb 1.61 oz) incl. CR2032
    Supplied accessories
    Remote commander (1)
    Audio connecting cable (1)
    AM loop antenna (1)
    Design and specifications are subject to change
    without notice.
    Owner’s Record
    The model number and the serial number are located
    on the rear exterior.
    Record the serial number in the space provided below.
    Refer to them whenever you call upon your Sony
    dealer regarding this product.
    Model No. ICF-C1iP
    Serial No.

Hulp nodig?

Aantal vragen: 0

Heeft u een vraag over de Sony ICF-C1IP of heeft u hulp nodig? Stel hier je vraag. Zorg voor een duidelijke en uitgebreide omschrijving van het probleem en je vraag. Hoe beter je probleem en vraag is omschreven, hoe makkelijker het is voor andere Sony ICF-C1IP bezitters om je van een goed antwoord te voorzien.

Bekijk hier gratis de handleiding van de Sony ICF-C1IP. Deze handleiding valt onder de categorie Cradles & docking stations en is door 1 mensen gewaardeerd met een gemiddelde van een 7.5. Deze handleiding is beschikbaar in de volgende talen: Engels. Heeft u een vraag over de Sony ICF-C1IP of heeft u hulp nodig? Stel hier je vraag

Sony ICF-C1IP specificaties

Gemak in de palm van je hand met een afstandsbediening die het bedienen van je scherm eenvoudiger maakt dan ooit.
Merk Sony
Model ICF-C1IP
Product Cradle/docking station
Taal Engels
Bestandstype PDF
Audio-uitgangskanalen 2.0 kanalen
Gemiddeld vermogen 6 W
Diameter van de luidspreker 51 mm
Kleur van het product Zwart
LED-indicatoren Stroom
FM-radio Ja
Overige specificaties
Compatibele producten iPods
Afmetingen (BxDxH) 300 x 130 x 139 mm
AC invoer voltage 120 V
AC invoer frequentie 60 Hz
Type accu/batterij CR2032
Ondersteund aantal accu's/batterijen 1
Accu/Batterij voltage 3 V
Gewicht en omvang
Gewicht 1860 g
Inhoud van de verpakking
Afstandsbediening Ja