Monacor ELIP-2812BV

Monacor ELIP-2812BV handleiding

  • 21 3 4
    Quick Start Guide
    1 2 3
    PoE Switch
    9 Port Fast Ethernet Switch With 8 Port PoE
    Power Adapter
    POE Ethernet Switch
    HD IP Camera (PoE)
    HD IP Camera (PoE)
    To PoE Switch LAN port
    DC 12V
    DC 12V
    HD IP Camera
    (without PoE)
    HD IP Camera
    (without PoE)
    To Switch or Router LAN port
    To Switch or Router LAN port
    To router LAN port
    HDMI or VGA output
    HDMI or VGA output
    RJ-45 To router LAN port
    To router LAN port
    PoE NVR
    To NVR PoE port
    This manual may contain some incorrect places, even though it was published with our carefully proofreading.
    The news updates will be added to the next release without notice. Your valuable advice is really appreciated.
    V 4.0
    1. The camera should be connected to an OPTIONAL 12 volt power supply if you do not use PoE (Power
    over Ethernet).
    2. A Windows computer is more convenient to setup and troubleshooting.
    Figure 1: Working With POE Switch
    Figure 2: Working With POE NVR
    Modifying the camera’s IP address
    Note you can also find out the LAN configuration via Windows GUI
    Now you can get all the
    local network information.
    IPv4 Address: 192.168.1.?
    Subnet Mask:
    Default gateway:
    DNS Servers:
    Default: IP address: , Username: admin, Password: 123456
    ( We strongly recommend modifying the default password for your security).
    Each IP camera has the same default IP address after leaving the factory. In order to
    guarantee network connectivity and access the live video, it is essential to change the
    camera’s IP address to unique via computer before using. You can install the device
    search tool or UC client from the CD to quickly configure the IP camera.
    Before modifying the IP address you’d better confirm the IP network planning and avoid
    IP address conflict.
    Steps on Local Area Windows 10 PC : Search Windows -> cmd -> ipconfig /all
    Right-click on the Network icon and select open Network and Sharing Center.
    If the camera is installed to work with the local switch or router directly, the camera
    IP range should be 192.168.1.x (x=2-254). To void IP conflict, you should test and
    select an unoccupied IP like this:
    Command Prompt ping test
    Only when reply unreachable
    that means the IP address is no
    conflict and available, otherwise
    when you see time reply do not
    use this IP address.
    Using Device Search Tool
    There are three methods to
    modify the camera IP configuration,
    Search tool,UC Client software
    and Internet Explorer.
    Modifying the camera’s IP address
    a. Click Start Search and all your cameras in
    the LAN will be listed. Modify IP address to suit
    the LAN’s IP scheme. There are two modifying
    methods available: 1) Right click on the desired
    camera and choose “Modify IP address”. 2) Click
    the ALL check-box then click “IP Batch Setting”.
    Reset Password ->Restore default settings;
    Video full-screen -> double-click video;
    Firmware upgrade -> Select the check-box, click Browse then click File Upgrade.
    b. You can also enable the camera DHCP function if
    there is a DHCP server available in the LAN.
    Most router has DHCP server built-in.
    (IP address in DHCP setting may change after
    device restart. We do not recommend leaving the IP camera on DHCP).
    Working with Internet Explorer
    To access the camera’s web interface, type in the IP camera’s IP address in Internet
    Explorer’s URL bar to gain access to the login page. Please modify IP address to the
    same subnet if login page can not load.
    (Default user name: admin, Password: 123456)
    Firefox ESR and IE are supported.
    From the login page, select your familiar language, then log in with the username
    and password.
    Using the UC client software
    (Default user name: admin, Password: 123456)
    1. Go to the Devices Config and click Start search, all the camera in the LAN
    will be listed. Highlighting one of the camera will populate the filed above.
    Change the parameter listed in the field and click on “Modify IP” to modify the
    camera’s IP address. Please modify the default IP address to match your LAN’s
    IP scheme. Note: Be careful when setting up IP addresses to not have
    duplicated IP as other devices in LAN.
    2. After changing all the IP cameras’ IP address, you can search again and add
    them all to the UC client. Once the cameras are added, go to the tab Video View
    and drag the camera into the split windows to start previewing the cameras.
    QR code for Danale APP
    Connecting the camera to system
    ELIP-2036BF ELIP-2036DF
    ELIP-2037PIR ELIP-2550BVM
    ELIP-2812BV ELIP-2812BWDR
    ELIP-2812DV ELIP-2812DVM

Vraag over de Monacor ELIP-2812BV?

Stel de vraag die je hebt over de Monacor ELIP-2812BV hier eenvoudig aan andere productbezitters. Zorg voor een duidelijke en uitgebreide omschrijving van het probleem en je vraag. Hoe beter je probleem en vraag is omschreven, hoe makkelijker het is voor andere Monacor ELIP-2812BV bezitters om je van een goed antwoord te voorzien.

Bekijk hier gratis de Monacor ELIP-2812BV handleiding. Heb je de handleiding gelezen maar geeft deze antwoord op je vraag? Stel dan je vraag op deze pagina aan andere Monacor ELIP-2812BV bezitters.

Product specificaties

Merk Monacor
Model ELIP-2812BV
Product Bewakingscamera
EAN []
Taal Engels
Bestandstype PDF
Vormfactor Rond
Kleur van het product Wit
Internationale veiligheidscode (IP) IP66
Montagewijze Ceiling/Wall
Soort IP-beveiligingscamera
Ondersteuning voor plaatsing Binnen & buiten
Connectiviteitstechnologie Bedraad
Dag/nacht modus
Ethernet interface type Fast Ethernet
Ethernet LAN
Ondersteunde netwerkprotocollen RTSP, DHCP, NTP, DST, FTP, SMTP
Ingebouwde HDD
Poorten & interfaces
Aantal Ethernet LAN (RJ-45)-poorten 1
Aantal lenzen 1
Brandpuntbereik 2.8 - 12mm
Maximum resolutie 1920 x 1080
Totaal aantal megapixels 2MP
Privézone maskeren
Videocompressieformaten H.264, H.265
Achtergrondverlichting compensatie
Digital Wide Dynamic Range (DWDR)
Nachtkijker afstand 40m
LED-type IR
Aantal verlichtingen LEDS 20
Video bewegings-detectie
Minimale belichting 0.01
Kantelfunctie camera
Controle camerapanning
Inhoud van de verpakking
Aantal cameras 1
Type stroombron DC, PoE
Stroomuitvoer (volt) 12
Stroomuitvoer (ampère) 0.6A
Eisen aan de omgeving
Temperatuur, in bedrijf -10 - 50°C
Gewicht en omvang
Breedte 83mm
Diepte 277mm
Hoogte 81mm
Gewicht 870g
Type beeldsensor CMOS
Aantal sensoren 1
Omvang optische sensor 1/2.7

Koop gerelateerde producten:

    Gerelateerde producten

    Bewakingscamera Monacor