Errors and omissions excepted. All information, technical specifications and delivery times may be subject to change.
Set-up
When installing the device, please ensure it has sufficient ventilation, especially when the
device is installed in a closed cabinet. A special frame for 19” racks is available for
mounting two devices in one height unit. (product number 01-00999-001).
The device is only designed for use in dry rooms. Operating temperature is between 0 °C
and 40 °C with relative humidity of 10 % to 90 % (non-condensing). Hardware problems
can occur if the device is used in environments outside of this range. Please wait until the
device has adapted to the new environment before carefully putting the device into
operation.
Reduce the risk of accidents by laying the connecting cables carefully. Take care not to
bend, pull or put too much mechanical strain on all connecting cables.
Power supply
The power supply may, depending on the device type, have an internal or external mains
adapter. All innovaphone devices can also use Power over Ethernet (PoE) according to
IEEE 802.3af to get their electricity over the network. All types of electrical power can be
connected simultaneously and can replace each another if one power source fails.
When used with the mains adapter, the device is designed for an AC network with 100V-
240 V and 50 Hz. Never attempt to connect the device to other mains supplies. Use only
the mains adapter and power cable supplied. Other mains adapters and power cables
could damage the device. Please note! Special cables that can be ordered from
innovaphone are necessary for Switzerland, Great Britain and Italy. Please consult the
innovaphone price list for further details.
The device is switched on as soon as it is connected to the power supply and the LED
labelled Ready is illuminated. The device cannot be operated if the network fails. However,
the device maintains its settings.
Configuration
Use the Ethernet cable to connect the device to your network. Device configuration takes
place over a web browser using the device’s IP address.
There are various different ways of putting a device into operation and assigning an IP
address to it. Initially, the device will try to establish a connection to the DHCP server. If
this is possible and the device is in the same subnet, the NetBIOS method can be used.
The NetBIOS name is made up of the device model and part of the MAC address as
follows: IPXXX-YY-YY-YY, whereby the symbol X should be replaced with the device
model name and the symbol Y with the last three Byte of the gateway's MAC address(e.g.
IP6010-06-15-B2 or IP28-05-14-B1). The MAC address can be found on the sticker at the
back of the device.
If your device is in a different subnet, access can take place over the IP address. You can
determine which IP address has been assigned with the help of the MAC address from the
DHCP lease.
If it is not possible to set up a connection to a DHCP server, it is necessary to short press
the Reset button. This assigns a static IP address to both Ethernet ports – either
192.168.0.1 (ETH0) or 192.168.1.1 (ETH1). Attention: the computer has to be in the
same subnet.
Bekijk hier gratis de handleiding van de Innovaphone IP800. Deze handleiding valt onder de categorie niet gecategoriseerd en is door 1 mensen gewaardeerd met een gemiddelde van een 6.6. Deze handleiding is beschikbaar in de volgende talen: Engels.
Heeft u een vraag over de Innovaphone IP800 of heeft u hulp nodig? Stel hier je vraag
Hulp nodig?
Heeft u een vraag over de Innovaphone en staat het antwoord niet in de handleiding? Stel hier je vraag. Zorg voor een duidelijke en uitgebreide omschrijving van het probleem en je vraag. Hoe beter je probleem en vraag is omschreven, hoe makkelijker het is voor andere Innovaphone bezitters om je van een goed antwoord te voorzien.
Het antwoord op uw vraag niet in de handleiding kunnen vinden? Wellicht staat het antwoord op uw vraag hieronder in de meest gestelde vragen over de Innovaphone IP800.
Wat is het gewicht van de Innovaphone IP800?
De Innovaphone IP800 heeft een gewicht van 1050 g.
Is de handleiding van de Innovaphone IP800 in het Nederlands beschikbaar?
Helaas hebben we de handleiding van de Innovaphone IP800 niet beschikbaar in het Nederlands. Deze handleiding is wel beschikbaar in het Engels.
Hulp nodig?
Heeft u een vraag over de Innovaphone en staat het antwoord niet in de handleiding? Stel hier je vraag. Zorg voor een duidelijke en uitgebreide omschrijving van het probleem en je vraag. Hoe beter je probleem en vraag is omschreven, hoe makkelijker het is voor andere Innovaphone bezitters om je van een goed antwoord te voorzien.
Aantal vragen: 0