Hori Split Pad Pro Nintendo Switch

Hori Split Pad Pro Nintendo Switch handleiding

(1)
  • Thank you for purchasing this product.
    Before using this product please read the instructions carefully.
    After reading the instruction manual, please keep it for reference.
    Instruction manual
    Controller:  × 1 Instruction manual:  × 1
    Nintendo Switch / PC(Xinput)
    Platform
    ● Keep this product out of the reach of children under 3.
    ● Keep this product away from small children.
      Seek medical advice immediately if it is swallowed.
    ● Please be careful and not allow children to wrap
      the cord around their neck.
    ● Keep the controller away from dusty or humid areas.
    ● Do not use this product if damage or alteration occurs.
    ● Do not get the product wet or leave it where it can get wet.
      It may cause an electric shock or defect.
    ● Do not leave the product around a heater, audio amp, etc.
      Do not leave it under direct sunlight It may cause a defect.
    ● Do not touch the metal parts of the USB plug with your
      finger or other metal material. It may cause injury or defect.
    ● Do not apply strong impact or weight on the product.
    ● Do not pull roughly or bend the cable of the controller.
    ● Never disassemble, repair or modify this product.
    ● If product needs cleaning, use only a soft dry cloth.
      Do not use any chemical agents like benzine or thinner.
    ● Do not use this product for anything other than its
      intended purpose.
      We are not responsible for any accidents or damages
      in the event of use other than the intended purpose.
    Caution
    Included
    Windows
    ®
    10
    8
    8.1
    7
    Supported OS
    USB Port, Internet ConnectionSystem requirements
    Important
    This product is not a wireless controller.
    Please be aware that unexpected action may occur if the Turbo function is used in the HOME Menu.
    Connect it to the Nintendo Switch Dock USB port.
    Do not connect to anything other than a USB port. It may cause a defect.
    Please insert the USB connector of the controller into the USB port of
    the Nintendo Switch
    TM
    Dock.
    Layout
    How to connect
    TURBO LED
    USB Connector
    ZR Button
    Left Stick
    {
    Left Stick Button (Hold)
    }
    Control Pad
    Capture Button
    TURBO Button
    HOME Button
    Controller cable
    Right Stick
    {
    Right Stick Button (Hold)
    }
    B Button
    A Button
    X Button
    Y Button
    -
    Button
    + Button
    L Button ZL Button R Button
    Nintendo Switch
    TURBO LED
    USB Connector
    RB Button
    Left Stick
    {
    Left Stick Button (Hold)
    }
    Control Pad
    There is no function
    TURBO Button
    GUIDE Button
    Controller cable
    Right Stick
    {
    Right Stick Button (Hold)
    }
    B Button
    A Button
    X Button
    Y Button
    BACK Button
    START Button
    LT Button LB Button
    RT Button
    PC
    Switch button functions between L/R and ZL/ZR buttons.
    Press and hold the ZL and ZR buttons simultaneously and connect the USB connector to
    the Nintendo Switch Dock USB port.
    Settings will be saved even after you unplug the controller or turn off the power.
    To reset the button settings, repeat the "How to switch" process.
    Turning ON the Nintendo Switch while simultaneously pressing the ZL/ZR buttons with the USB connected will switch the button settings.
    How to switch
    The Turbo hold function allows continuous rapid ire without having to hold the button.
    (Pressing the assigned button deactivates this).
    * Control Pad (UP, DOWN, LEFT or RIGHT) are not compatible with the Turbo hold mode,
    and can only be set to Turbo mode.
    The following buttons can be set to Turbo or Turbo hold mode:
    A Button / B Button / X Button / Y Button / L Button / R Button / ZL Button / ZR Button /
    Control Pad (UP / DOWN / LEFT / RIGHT)
    How to use the Turbo Functions
    L/R to ZL/ZR Toggle Function
    L Button
    ZL Button
    R Button
    ZR Button
    Connect it to the Nintendo Switch Dock USB port.
    +
    TURBO LED will turn off.
    TURBO LED (RED) will turn on.
    Main Features
    You can adjust the Turbo mode to 3 different speeds.
    While pressing the Turbo Button, push up on the Right Analog Stick
    to change the Turbo speed in the following order :
    5 times/second → 10 times/second → 20 times/second
    While pressing the Turbo Button, push down on the Right Analog Stick
    to change the Turbo speed in the following order :
    20 times/second → 10 times/second → 5 times/second
    How to change Turbo Speed
    +
    +
    ■ External dimensions : (width) 103mm × (depth) 141mm × (height) 69mm
    ■ Cable length : (Overall length) Approximately 3 m■ Weight : About 230g
    ■ Rating : 5V 45mA
     This product is not a wireless controller.
     This product is not equipped with vibration function.
     The image on the packaging may differ from the actual product.
     The manufacturer reserves the right to change the product design or speciications without notice.
     Nintendo Switch logo, Nintendo Switch are trademarks of Nintendo.
     HORI & HORI logo are registered trademarks of HORI.
    Please read the Nintendo Switch instructions carefully before you use this product
    with the Nintendo Switch console.
    Make sure that your Nintendo SwitchTM is updated with the latest system software.
    L Button
    ZL Button
    R Button
    ZR Button
    +
    TURBO Button
    +
    TURBO Button
    Turbo OFF
    * The Turbo LED will flash at a rate corresponding to the Turbo speed. The Turbo LED will flash as long as one of the button is in Turbo mode.
    * By pressing the HOME Button, all Turbo function and Turbo hold settings will be deactivated.
    When restarting game play, you will need to set the Turbo function again.
    * Turbo Function may not be compatible with all software titles. Please try adjusting the Turbo settings or simply turn OFF TURBO.
    * Turbo function will deactivate when you unplug the USB connector.
    Turbo LED StatusSetting method
    Turbo Mode
    OFF
    (All buttons)
    Hold down the Turbo button and
    then press the button that you
    want to set to Turbo mode.
    +
    TURBO Button
    Turbo Hold
    Press the button once more,
    and the button will remain
    inTurbo (Turbo Hold).
    Pressing the button again
    once more will deactivate
    the Turbo function.
    Hold the TURBO Button and
    press the SELECT Button.
    OFF
    OFF
    Button OFF
    TURBO LED will lash.
    Green or Orange
    Button ON
    TURBO LED will turn on.
    Green or Orange
    Button OFF
    TURBO LED will turn on.
    Green or Orange
    Button ON
    TURBO LED will lash.
    Green or Orange
    +
    TURBO Button
    -
    Button
    In the case that after deactivating the turbo
    function, the turbo Indicator LED does not
    turn off, this means that there is still a button
    set to Turbo/Turbo Hold.
    ※ LED will turn red while L/R and ZL/ZR button
      functions are switched.
    If you forget which buttons you have set to
    Turbo mode, deactivate them all and reassign,
    as you require.
    ※ LED will turn red while L/R and ZL/ZR button
      functions are switched.
    * Turbo speed is set to 10 times/second by default.
    * Right Stick must be returned to the neutral position before changing to the next turbo speed.
    * The Turbo LED will lash at a rate corresponding to the Turbo speed for 2 seconds.
    Target age : 6 years and over
Hori Split Pad Pro Nintendo Switch

Hulp nodig?

Aantal vragen: 0

Heeft u een vraag over de Hori Split Pad Pro Nintendo Switch of heeft u hulp nodig? Stel hier je vraag. Zorg voor een duidelijke en uitgebreide omschrijving van het probleem en je vraag. Hoe beter je probleem en vraag is omschreven, hoe makkelijker het is voor andere Hori Split Pad Pro Nintendo Switch bezitters om je van een goed antwoord te voorzien.

Bekijk hier gratis de handleiding van de Hori Split Pad Pro Nintendo Switch. Deze handleiding valt onder de categorie Controllers en is door 1 mensen gewaardeerd met een gemiddelde van een 7.5. Deze handleiding is beschikbaar in de volgende talen: Engels. Heeft u een vraag over de Hori Split Pad Pro Nintendo Switch of heeft u hulp nodig? Stel hier je vraag

Hori Split Pad Pro Nintendo Switch specificaties

Algemeen
Merk Hori
Model Split Pad Pro Nintendo Switch
Product Controller
Taal Engels
Bestandstype PDF

Veelgestelde vragen

Hieronder vindt u de meest gestelde vragen over de Hori Split Pad Pro Nintendo Switch.

Staat je vraag er niet tussen? Stel hier je vraag

Handleidi.ng

Op zoek naar een handleiding? Handleidi.ng zorgt er voor dat je binnen no-time de handleiding vindt die je zoekt. In onze database zitten meer dan 1 miljoen PDF handleidingen van meer dan 10.000 merken. Elke dag voegen wij de nieuwste handleidingen toe zodat je altijd het product zal vinden wat je zoekt. Het is heel eenvoudig: typ in de zoekbalk de merknaam en het type product en je kan direct de handleiding van je keuze gratis online bekijken.

Handleidi.ng

© Copyright 2020 Handleidi.ng. Alle rechten voorbehouden.

We gebruiken cookies om er zeker van te zijn dat je onze website zo goed mogelijk beleeft. Als je deze website blijft gebruiken gaan we ervan uit dat je dat goed vindt.

Meer info