Hikvision DS-2CE56D1T-IRM handleiding

Hikvision DS-2CE56D1T-IRM
7.6 · 2
PDF handleiding
 · 2 pagina's
Engels
handleidingHikvision DS-2CE56D1T-IRM
TVI Turret Camera
User Manual
Thank you for purchasing our product. If there
are any questions, or requests, please do not
hesitate to contact the dealer.
This manual applies to
This manual may contain several technical
incorrect places or printing errors, and the
content is subject to change without notice.
The updates will be added to the new version of
this manual. We will readily improve or update
the products or procedures described in the
manual.
Regulatory InformationFCC Information
FCC compliance: This equipment has been
tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
0100001040919
FCC Conditions
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
EU Conformity Statement
upon the purchase of equivalent new equipment,
or dispose of it at designated collection points.
For more information see:
www.recyclethis.info.
2006/66/EC (battery directive):This
product contains a battery that cannot
be disposed of as unsorted municipal
waste in the European Union.
See the product documentation for specific
battery information. The battery is marked with
this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your
supplier or to a designated collection point. For
more information see: www.recyclethis.info.
This series of camera adopts new generation
sensor with high sensitivity and advanced circuit
design technology It features high resolution,.
low image distortion and low noise, etc , which.
makes it suitable for surveillance system and
image processing system.
l High performance CMOS sensor and high
resolution bring high-quality image;
l Low illumination;
l OSD menu, parameters are configurable;
l Support auto white balance, auto gain control,
Support image effect adjustment;
l
l
Unit transmission control;
l Advanced 3-axis design meets different
installation requirements.

1 Introduction

1.1 Product Features1.2 Overview
UD.6L0201D1603A01
2012/19/EU (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
Please refer to the product specification for
camera parameters and functions.
This product and - if applicable - the
supplied accessories too are marked
with "CE" and comply therefore with
the applicable harmonized European
standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC,
the RoHS Directive 2011/65/EU.
1.2.1 Overview of Type I Camera1.2.2 Overview of Type Camera
II
Enclosure
HD Video Cable
Mounting Base
1.2.3 Overview of Type CameraIII

2 Installation

Before you start:
l Please make sure that the device in the package
is in good condition and all the assembly parts
are included.
l Make sure that all the related equipment is
power-off during the installation.
l Check the specification of the products for the
installation environment.
l Check whether the power supply is matched
with your power output to avoid damage.
l Please make sure the wall is strong enough to
withstand three times the weight of the camera
and the mounting.
l If the wall is the cement wall, you need to insert
expansion screws before you install the camera.
If the wall is the wooden wall, you can use
self-tapping screw to secure the camera.
l If the product does not function properly,
please contact your dealer or the nearest
service center. Do not disassemble the camera
for repair or maintenance by yourself.
2.1 Installation of Type CameraI
Steps:
1.Drill the screw holes according to the drill
template.
Figure 2-1 The Drill Template
2. Screw the clip plate onto the mounting base
loosely.
Power Cable
HD Video Cable
Mounting Base
Camera
Trim Ring
Enclosure
Power Cable
Camera
Trim Ring
Enclosure
Camera
HD Video Cable
Power Cable
Mounting Base
3. Fix the mounting base to the ceiling with the
supplied screws.
4.Route the cables to the cable hole and connect
the corresponding power cable and video cable.
5.Pull out the clip plate and secure the camera
with the trim ring to the mounting base.
6.Push the clip plate in and tighten the lock screw
to secure the trim ring.
Figure 2-2 Screw the Clip Plate
Clip Plate
Screw hole

TURBO HD

Type
Type
Type
Type
I
II
III
Model
DS-2CE56D1T-IRM
DS-2CE56D1T-IT3
DS-2CE56D1T-IR
Side Opening

Handleiding

Bekijk hier gratis de handleiding van de Hikvision DS-2CE56D1T-IRM. Deze handleiding valt onder de categorie Bewakingscamera's en is door 2 mensen gewaardeerd met een gemiddelde van een 7.6. Deze handleiding is beschikbaar in de volgende talen: Engels. Heeft u een vraag over de Hikvision DS-2CE56D1T-IRM of heeft u hulp nodig? Stel hier je vraag

Hulp nodig?

Heeft u een vraag over de Hikvision DS-2CE56D1T-IRM en staat het antwoord niet in de handleiding? Stel hier je vraag. Zorg voor een duidelijke en uitgebreide omschrijving van het probleem en je vraag. Hoe beter je probleem en vraag is omschreven, hoe makkelijker het is voor andere Hikvision DS-2CE56D1T-IRM bezitters om je van een goed antwoord te voorzien.

Aantal vragen: 0

Hikvision DS-2CE56D1T-IRM specificaties

Hieronder vindt u de productspecificaties en de handleiding specificaties van de Hikvision DS-2CE56D1T-IRM.

Algemeen
Merk Hikvision
Model DS-2CE56D1T-IRM
Product Bewakingscamera
EAN 813908020922, 0813908028126
Taal Engels
Bestandstype Handleiding (PDF)
Prestatie
Soort CCTV-bewakingscamera
Ondersteuning voor plaatsing Buiten
Connectiviteitstechnologie Bedraad
Dag/nacht modus Ja
Infrarood (IR)-afsluitingsfilter Ja
Ondersteunde talen CHI (SIMPL),CHI (TR),ENG
Audio
Signaal/ruis-verhouding 52 dB
Gewicht en omvang
Hoogte 59.1 mm
Breedte 82.6 mm
Diepte 89.6 mm
Gewicht 400 g
Design
Vormfactor Dome
Kleur van het product Wit
Montagewijze Plafond
Internationale veiligheidscode (IP) IP66
Weerbestendig Ja
Energie
Power over Ethernet (PoE) Nee
Stroomuitvoer (volt) 12
Vermogensverbruik (max) 3 W
Video
Maximum resolutie 1920 x 1080 Pixels
Ondersteunde video-modi 1080p
Formaat analoog signaal NTSC,PAL
Maximaal 30 frames per seconde 30 fps
Totaal aantal megapixels 2 MP
Volledige HD Ja
Ruisonderdrukking Ja
Privézone maskeren Ja
Camera
Minimale belichting 0.034 Lux
Field of view (FOV) hoek 55.4 °
Bereik kantelhoek 0 - 75 °
Pan bereik 0 - 355 °
Draaihoek 355 °
Witbalans Auto,Manual,Push
Camera sluitertijd 1/30 - 1/50000 s
Beeldsensor
Type beeldsensor CMOS
Omvang optische sensor 1/2.7 "
Progressive scan Ja
Lenssysteem
Vaste focale lengte 6 mm
Maximum aperture number 2.5
Beveiliging
Bewegingssensor Ja
Opslagmedia
Ingebouwde HDD Nee
Nachtkijker
Nachtvisie Ja
Nachtkijker afstand 20 m
LED-type IR
Netwerk
Ethernet LAN Nee
Wifi Nee
Technische details
Lens mount interface M12
Inhoud van de verpakking
Aantal cameras 1
Eisen aan de omgeving
Bedrijfstemperatuur (T-T) -40 - 60 °C
Relatieve vochtigheid in bedrijf (V-V) 0 - 90 procent
toon meer

Veelgestelde vragen

Het antwoord op uw vraag niet in de handleiding kunnen vinden? Wellicht staat het antwoord op uw vraag hieronder in de meest gestelde vragen over de Hikvision DS-2CE56D1T-IRM.

Staat je vraag er niet tussen? Stel hier je vraag

Geen resultaten