Hikvision DS-2CE16D1T-IT5 handleiding

Hikvision DS-2CE16D1T-IT5
9.9 · 1
PDF handleiding
 · 2 pagina's
Engels
handleidingHikvision DS-2CE16D1T-IT5

TVI Bullet Camera

User Manual
Regulatory InformationFCC Information
FCC compliance: This equipment has been
tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
FCC Conditions
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
EU Conformity Statement
upon the purchase of equivalent new equipment,
or dispose of it at designated collection points.
For more information see:
www.recyclethis.info.
2006/66/EC (battery directive):
This product contains a battery that
cannot be disposed of as unsorted
municipal waste in the European
Union.
See the product documentation for specific
battery information. The battery is marked with
this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your
supplier or to a designated collection point. For
more information see: www.recyclethis.info.
UD.6L0201D1935A01
2012/19/EU (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
This product and - if applicable - the
supplied accessories too are marked
with "CE" and comply therefore with
the applicable harmonized European
standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC,
the RoHS Directive 2011/65/EU.

TURBO HD

This series of camera adopts new generation
sensor with high sensitivity and advanced circuit
design technology It features high resolution,.
low image distortion and low noise, etc , which.
makes it suitable for surveillance system and
image processing system.
l High performance CMOS sensor and high
resolution bring high-quality image;
l Low illumination;
l OSD menu, parameters are configurable;
l Support auto white balance, auto gain control,
electronic shutter control;
Support image effect adjustment;
l
l
Unit transmission control;
l Advanced 3-axis design meets different
installation requirements.

1 Introduction

1.1 Product Features
1.2 Overview
1.2.1 Overview of Type I Camera1.2.2 Overview of Type Camera
II
1.2.3 Overview of Type CameraIII

2 Installation

Before you start:
l Please make sure that the device in the package
is in good condition and all the assembly parts
are included.
l Make sure that all the related equipment is
power-off during the installation.
l Check the specification of the products for the
installation environment.
l Check whether the power supply is matched
with your power output to avoid damage.
l Please make sure the wall is strong enough to
withstand three times the weight of the camera
and the mounting.
l If the wall is the cement wall, you need to insert
expansion screws before you install the camera.
If the wall is the wooden wall, you can use
self-tapping screw to secure the camera.
l If the product does not function properly,
please contact your dealer or the nearest
service center. Do not disassemble the camera
for repair or maintenance by yourself.
HD Video Cable
Power Cable
Mounting Base
Sun Shield
Lens
IR LED
Sun Shield
Mounting BasePower Cable
HD Video Cable
Lens

Power Cable

HD Video Cable

Sun Shield

Steps:
1.Drill the screw holes in the ceiling according
to the supplied drill template.
2.Hammer the supplied plastic expansion bolt into
the screw holes.
2.1 Ceiling Mounting for Type I
Type /CameraII
Figure 2-1 Drill Template
All Screw Holes: for
mounting base
Lens
3.Route the cables to the cable hole and connect
the corresponding power cable and video cable.
4.Fix the camera to the ceiling with the supplied
screws.
Thank you for purchasing our product. If there
are any questions, or requests, please do not
hesitate to contact the dealer.
This manual applies to
This manual may contain several technical
incorrect places or printing errors, and the
content is subject to change without notice.
The updates will be added to the new version of
this manual. We will readily improve or update
the products or procedures described in the
manual.
0100001050409
Please refer to the product specification for
camera parameters and functions.
Type
Type
Type
I
II
Model
Privacy Notice
Surveillance laws vary by jurisdiction. Check
all relevant laws in your jurisdiction before using
this product for surveillance purposes to ensure
that your use of this product conforms.
Type
III

DS-2CE16D1T-IT3

DS-2CE16D1T-IT5

DS-2CE16D1T-IR

DS-2CE16D1T-IT1

Handleiding

Bekijk hier gratis de handleiding van de Hikvision DS-2CE16D1T-IT5. Deze handleiding valt onder de categorie Bewakingscamera's en is door 1 mensen gewaardeerd met een gemiddelde van een 9.9. Deze handleiding is beschikbaar in de volgende talen: Engels. Heeft u een vraag over de Hikvision DS-2CE16D1T-IT5 of heeft u hulp nodig? Stel hier je vraag

Hulp nodig?

Heeft u een vraag over de Hikvision DS-2CE16D1T-IT5 en staat het antwoord niet in de handleiding? Stel hier je vraag. Zorg voor een duidelijke en uitgebreide omschrijving van het probleem en je vraag. Hoe beter je probleem en vraag is omschreven, hoe makkelijker het is voor andere Hikvision DS-2CE16D1T-IT5 bezitters om je van een goed antwoord te voorzien.

Aantal vragen: 0

Hikvision DS-2CE16D1T-IT5 specificaties

Hieronder vindt u de productspecificaties en de handleiding specificaties van de Hikvision DS-2CE16D1T-IT5.

Algemeen
Merk Hikvision
Model DS-2CE16D1T-IT5
Product Bewakingscamera
Taal Engels
Bestandstype Handleiding (PDF)
Prestatie
Soort CCTV-bewakingscamera
Ondersteuning voor plaatsing Buiten
Connectiviteitstechnologie Bedraad
Dag/nacht modus Ja
Aantal talen 2
Ondersteunde talen CHI (SIMPL),CHI (TR),ENG
Design
Vormfactor Rond
Kleur van het product Wit
Montagewijze Muur
Internationale veiligheidscode (IP) IP66
Weerbestendig Ja
Video
Totaal aantal megapixels 2 MP
Formaat analoog signaal NTSC,PAL
Maximum resolutie 1930 x 1088 Pixels
Maximaal 30 frames per seconde 25 fps
Ondersteunde video-modi 1080p
Privézone maskeren Ja
Nachtkijker
Nachtvisie Ja
LED-type IR
Nachtkijker afstand 80 m
Beeldsensor
Type beeldsensor CMOS
Camera
Minimale belichting 0 Lux
Camera sluitertijd 1/25 - 1/50000 s
Pan bereik 0 - 360 °
Bereik kantelhoek 0 - 180 °
Draaihoek 360 °
Witbalans ATW,Push
Lenssysteem
Vaste focale lengte 6 mm
Maximum aperture number 1.2
Inhoud van de verpakking
Aantal cameras 1
Audio
Signaal/ruis-verhouding 62 dB
Beveiliging
Bewegingssensor Ja
Energie
Power over Ethernet (PoE) -
Stroomuitvoer (volt) 12
Vermogensverbruik (max) 5 W
Eisen aan de omgeving
Bedrijfstemperatuur (T-T) -40 - 60 °C
Relatieve vochtigheid in bedrijf (V-V) 0 - 90 procent
Gewicht en omvang
Breedte 86.22 mm
Diepte 220.13 mm
Hoogte 82.05 mm
Gewicht 70 g
Netwerk
Wifi -
Ethernet LAN -
toon meer

Veelgestelde vragen

Het antwoord op uw vraag niet in de handleiding kunnen vinden? Wellicht staat het antwoord op uw vraag hieronder in de meest gestelde vragen over de Hikvision DS-2CE16D1T-IT5.

Staat je vraag er niet tussen? Stel hier je vraag

Geen resultaten