Chief SLM283 handleiding

Chief SLM283
6.1 · 1
PDF handleiding
 · 1 pagina
Engels
handleidingChief SLM283

INSTALLATION INSTRUCTIONS

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8802-002089 Rev00
©2011 Milestone AV Technologies,
a Duchossois Group Company
04/11

SSB-283, SSM-283, SLB-283 and SLM-283 Interface Brackets

SSB-283, SSM-283, SLB-283 and SLM-283 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific
installation instructions provided with the mount for additional installation information.
Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND
DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.
NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.
1. Screw thumb screws onto 10-24 x 5/8" Phillips flat head screws. DO NOT fully tighten thumb screws at this time.
2. Turn projector upside down on a flat surface.
3. Place spacers onto bottom of projector, aligning spacers with the threaded inserts in bottom of projector.
4. Place the interface bracket onto the spacers, aligning the mounting holes in the bracket with the spacers and threaded inserts in the bottom
of the projector, and ensuring that triangle in bracket points towards front of projector.
5. Position M4 x 25mm mounting screws through bracket, spacers and into the threaded inserts. Tighten all fasteners at this time, securing
the bracket to the projector.
NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the
All-Points Security Kit.
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
(1) Interface Bracket (4) Screw, Phillips Flat Head, Machine, M4 x 25mm
(4) 10-24 Thumb Nuts ** (4) Spacer, .500 x .316 x .500
(1) All-Points Security Kit (1) 5/32" Security Hex Key
**Only used when installing SLB/SSB interface brackets.
NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations above.
DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.
Note: SSB-style interface bracket connections are circled. Note: SSM-style interface bracket connections are circled.
SLB-283
SLM-283
Towards front
of projector
Towards front
of projector

Handleiding

Bekijk hier gratis de handleiding van de Chief SLM283. Deze handleiding valt onder de categorie Projector accessoires en is door 1 mensen gewaardeerd met een gemiddelde van een 6.1. Deze handleiding is beschikbaar in de volgende talen: Engels. Heeft u een vraag over de Chief SLM283 of heeft u hulp nodig? Stel hier je vraag

Hulp nodig?

Heeft u een vraag over de Chief SLM283 en staat het antwoord niet in de handleiding? Stel hier je vraag. Zorg voor een duidelijke en uitgebreide omschrijving van het probleem en je vraag. Hoe beter je probleem en vraag is omschreven, hoe makkelijker het is voor andere Chief SLM283 bezitters om je van een goed antwoord te voorzien.

Aantal vragen: 0

Chief SLM283 specificaties

Hieronder vindt u de productspecificaties en de handleiding specificaties van de Chief SLM283.

Algemeen
Merk Chief
Model SLM283
Product Projector accessoire
EAN 0841872152318
Taal Engels
Bestandstype Handleiding (PDF)
Logistieke gegevens
Aantal per verpakking 1 stuk(s)
Gewicht en omvang
Gewicht verpakking 2000 g
Kenmerken
Kleur van het product Zwart
Merkcompatibiliteit -
Type product -
toon meer

Veelgestelde vragen

Het antwoord op uw vraag niet in de handleiding kunnen vinden? Wellicht staat het antwoord op uw vraag hieronder in de meest gestelde vragen over de Chief SLM283.

Staat je vraag er niet tussen? Stel hier je vraag

Geen resultaten