Name: Chief SLM278
Brand: Chief
SKU: 766027
Rating: 57 (1 reviews)

handleidingChief SLM278

INSTALLATION INSTRUCTIONS

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes

no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use

of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or

implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8802-002078 Rev01

a Duchossois Group Company

03/11

SSB-278, SSM-278, SLB-278 and SLM-278 Interface Brackets

SSB-278, SSM-278, SLB-278 and SLM-278 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific

installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.

2. Turn projector upside down on a flat surface.

3. Place five spacers onto the bottom of the projector, aligning the spacers with the threaded inserts in the projector.

4. Place the interface bracket onto the spacers, aligning the mounting holes in the bracket with the spacers and threaded inserts in the bottom

of the projector and ensuring that triangle in bracket points towards front of projector.

5. Position M4 x 25mm mounting screws into the bracket mounting holes and threaded inserts. Tighten all fasteners at this time, securing

the bracket to the projector.

NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the

All-Points Security Kit.

(1) Interface Bracket (5) Spacer, .500 x .316 x .500

(6) 10-24 Thumb Nuts ** (5) Screw, Phillips Flat Head, Machine, M4 x 25mm

(1) All-Points Security Kit (1) 5/32" Security Hex Key

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations above.

DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.

Note: SSB-style interface bracket connections are circled. Note: SSM-style interface bracket connections are circled.

SLB-278

SLM-278

Towards front

of projector

Towards front

of projector

Handleiding

Bekijk hier gratis de handleiding van de Chief SLM278. Deze handleiding valt onder de categorie Projector accessoires en is door 1 mensen gewaardeerd met een gemiddelde van een 5.7. Deze handleiding is beschikbaar in de volgende talen: Engels. Heeft u een vraag over de Chief SLM278 of heeft u hulp nodig? Stel hier je vraag

Hulp nodig?

Heeft u een vraag over de Chief SLM278 en staat het antwoord niet in de handleiding? Stel hier je vraag. Zorg voor een duidelijke en uitgebreide omschrijving van het probleem en je vraag. Hoe beter je probleem en vraag is omschreven, hoe makkelijker het is voor andere Chief SLM278 bezitters om je van een goed antwoord te voorzien.

Aantal vragen: 0

Chief SLM278 specificaties

Hieronder vindt u de productspecificaties en de handleiding specificaties van de Chief SLM278.

Algemeen

Merk	Chief
Model	SLM278
Product	Projector accessoire
EAN	0841872149554
Taal	Engels
Bestandstype	Handleiding (PDF)

Gewicht en omvang

Gewicht verpakking

2000 g

Logistieke gegevens

Aantal per verpakking

1 stuk(s)

Kenmerken

Kleur van het product	Zwart
Merkcompatibiliteit	-
Type product	-

toon meer

Veelgestelde vragen

Het antwoord op uw vraag niet in de handleiding kunnen vinden? Wellicht staat het antwoord op uw vraag hieronder in de meest gestelde vragen over de Chief SLM278.

Staat je vraag er niet tussen? Stel hier je vraag

Geen resultaten