Chief SLM275 handleiding

Chief SLM275
7.2 · 1
PDF handleiding
 · 1 pagina
handleidingChief SLM275


Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8802-002072 Rev00
©2010 Milestone AV Technologies,
a Duchossois Group Company

SSB-275, SSM-275, SLB-275 and SLM-275 Interface Brackets

SSB-275, SSM-275, SLB-275 and SLM-275 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific
installation instructions provided with the mount for additional installation information.
Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

Installation Instructions

DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.
NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.
1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
2. Turn projector upside down on a flat surface.
3. Place the interface bracket onto the bottom of the projector, aligning the mounting holes in the bracket with the threaded inserts in the
bottom of the projector and ensuring that triangle in bracket points towards front of projector.
4. Position M6 x 10mm mounting screws with M6 flat washers into the threaded inserts and three bracket side tabs. Position 1/2" tall spacer
underneath threaded insert and mounting hole at front of interface bracket. Place the M6 x 20mm screw into the threaded insert and
mounting hole at front of interface bracket and through 1/2" spacer. Tighten all fasteners at this time, securing the bracket to the projector.
NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation
instructions in the All-Points Security Kit.
Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.
(1) Interface Bracket (3) Screw, Phillips Pan Head, Machine, M6 x 10mm
(4) 10-24 Thumb Nuts ** (1) Screw, Phillips Flat Head, Machine, M6 x 20mm
(3) Washer, M6
(1) All-Points Security Kit (1) 5/32" Hex Key
**Only used when installing SLB/SSB interface brackets.
NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations above.
DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.
Note: SSB-style interface bracket connections are circled.
Note: SSM-style interface bracket connections are circled.
Towards front
of projector
Towards front
of projector
(1) Nylon Spacer, 1/2" x .316" x 1/2"


Bekijk hier gratis de handleiding van de Chief SLM275. Deze handleiding valt onder de categorie Projector accessoires en is door 1 mensen gewaardeerd met een gemiddelde van een 7.2. Deze handleiding is beschikbaar in de volgende talen: Engels. Heeft u een vraag over de Chief SLM275 of heeft u hulp nodig? Stel hier je vraag

Hulp nodig?

Heeft u een vraag over de Chief SLM275 en staat het antwoord niet in de handleiding? Stel hier je vraag. Zorg voor een duidelijke en uitgebreide omschrijving van het probleem en je vraag. Hoe beter je probleem en vraag is omschreven, hoe makkelijker het is voor andere Chief SLM275 bezitters om je van een goed antwoord te voorzien.

Aantal vragen: 0

Chief SLM275 specificaties

Hieronder vindt u de productspecificaties en de handleiding specificaties van de Chief SLM275.

Merk Chief
Model SLM275
Product Projector accessoire
EAN 0841872149318
Taal Engels
Bestandstype Handleiding (PDF)
Gewicht en omvang
Gewicht verpakking 2000 g
Logistieke gegevens
Aantal per verpakking 1 stuk(s)
Kleur van het product Zwart
Merkcompatibiliteit -
Type product -
toon meer

Veelgestelde vragen

Het antwoord op uw vraag niet in de handleiding kunnen vinden? Wellicht staat het antwoord op uw vraag hieronder in de meest gestelde vragen over de Chief SLM275.

Staat je vraag er niet tussen? Stel hier je vraag

Geen resultaten