Barracuda Networks Message Archiver 350 handleiding

Barracuda Networks Message Archiver 350
  • Aantal pagina's: 2
  • Bestandstype: PDF

Message Archiver

Barracuda Message Archiver - Quick Start Guide

Update the Firmware
1. Go to Advanced

ÆFirmware Update to check for the latest firmware

updates. If there is none available, skip to Step 7.
2. Press Download Firmware. Click OK to acknowledge the download duration
message. To avoid damaging the unit, do not power OFF during an update
or download. To view download progress, refresh your browser. You will be
notified when the download is complete.
3. On the Advanced
ÆFirmware Update page, click the Apply Now button to
apply the firmware. This will take a few minutes to complete.
4. Click OK when prompted to reboot.
5. After applying the firmware, you will be required to log in again to the Web
interface. Also, make sure to read the Release Notes to learn about
enhancements and new features. It is also good practice to verify settings, as
new features may have been included with the firmware update.
Change the Administrator Password
To avoid unauthorized use, we recommend you change the default administrator
password to a more secure password. You can only change the administrator
password for the Web interface. You cannot change the password for the
Administrative Console, but this is only accessible via the keyboard which you
can disconnect at any time.
1. Go to BasicÆAdministration and enter your old and new passwords.
2. Click Save Password.
Product Activation
Verify that your Energize Updates subscription is activated on your Barracuda
Message Archiver by going to the Basic

ÆStatus page. Under Subscription

Status, make sure the Energize Updates subscription is Current. If the Energize
Updates status is "Not Activated", click the activation link to go to the Barracuda
Networks Product Activation page and complete activation of your subscriptions.
Configure and Activate Journaling on your Email Server
If you have an email server that is capable of journaling, make sure that it is set
up and enabled per the directions for your particular email server. If your email
server does NOT have journaling capabilities, skip to Step 11.
1. Notes for Microsoft® Exchange 2003:
Make sure to enable envelope journaling. "Envelope journaling" in an
additional setting that must be enabled at a global level in Exchange in order
for it to be in effect whenever standard (aka "message-only") journaling is
activated for a particular mailbox store. More information on journaling,
including specific activation directions, can be found in several places on
Microsoft's Knowledge Base and TechNet sites:
Enabling "Message only" journaling:
Enabling "Envelope" journaling:
Troubleshooting message journaling in Exchange:
2. Notes for journaling via a designated journal account:
Make sure that the journal email account is ready to receive all journaled
emails, and is able to retrieve email directly from the email server over one
of the standard protocols (POP3, IMAP, etc).
Configure Journal Accounts on the Barracuda Message Archiver
Once journaling is working on your email server, enter the information for the
journal account into the Barracuda Message Archiver to begin archiving:
1. Go to Basic

ÆRemote Journal Accounts.

2. Enter the Server name, Username and Password for the journal account.
3. Select the Protocol used to communicate with the email server.
4. Select the desired Keep Items on Server option, to determine whether or
not journaled items are to be kept on the email server after they have been
entered into the Barracuda Message Archiver.
5. Click the Add button to activate this journal account.
6. Repeat steps 2 thru 5 for any additional journal accounts you wish to
Your Barracuda Message Archiver is now active and archiving all messages.
If you do NOT have a journaling-capable email server...
If your email server does not have built-in journaling capabilities, then you must
have a journaling-capable appliance like the Barracuda Spam & Virus Firewall to
act as an SMTP proxy to your email server. To set up journaling on a
Barracuda Spam & Virus Firewall (firmware version 3.5 or later):
1. On your Barracuda Spam & Virus Firewall
, go to AdvancedÆJournaling.
2. In the Destination E-mail Address field, enter an SMTP recipient in the
form: username@ip_address_of_Barracuda_Message_Archiver
Example: archive@
3. In the Journal Message Bounce Address field, enter the email address
that is to receive all bounce notifications from the Barracuda Message
4. Click Save Changes.
Your Barracuda Spam & Virus Firewall is now ready to journal all messages
directly to your Barracuda Message Archiver.
For additional documentation including an Administrator’s Guide, visit
Contact and Copyright Information
Barracuda Networks, Inc. 3175 S. Winchester Blvd, Campbell, CA 95008 USA phone: 408.342.5400 fax: 408.342.1061
Copyright 2004-2008© Barracuda Networks, Inc. All rights reserved. Use of this product and this manual is subject to license. Information in this document is
subject to change without notice. Barracuda Spam Firewall is a trademark of Barracuda Networks, Inc. All other brand and product names mentioned in this
document are registered trademarks or trademarks of their respective holders. 070727-10-08-0407
Barracuda Networks Message Archiver 350

Hulp nodig?

Aantal vragen: 0

Heeft u een vraag over de Barracuda Networks Message Archiver 350 of heeft u hulp nodig? Stel hier je vraag. Zorg voor een duidelijke en uitgebreide omschrijving van het probleem en je vraag. Hoe beter je probleem en vraag is omschreven, hoe makkelijker het is voor andere Barracuda Networks Message Archiver 350 bezitters om je van een goed antwoord te voorzien.

Bekijk hier gratis de handleiding van de Barracuda Networks Message Archiver 350. Deze handleiding valt onder de categorie Servers en is door 1 mensen gewaardeerd met een gemiddelde van een 9.4. Deze handleiding is beschikbaar in de volgende talen: Engels. Heeft u een vraag over de Barracuda Networks Message Archiver 350 of heeft u hulp nodig? Stel hier je vraag

Barracuda Networks Message Archiver 350 specificaties

Merk Barracuda Networks
Model Message Archiver 350
Product Server
Taal Engels
Bestandstype PDF
Opslagdrives geïnstalleerd Ja
Geïnstalleerde opslag-drive HDD
Totale geïnstalleerde opslagcapaciteit 2 TB
Ondersteunde types opslag-drives HDD
Opslag schijf-interface -
RAID support Ja
Soorten RAID 1
Hot-swap drive bays -
Processorfamilie -
Processormodel -
Intern geheugen - GB
Intern geheugentype -
Ethernet LAN Ja
Ethernet LAN, data-overdrachtsnelheden 10,100,1000 Mbit/s
Wifi Nee
DHCP client -
DHCP server -
iSCSI support Ja
Ondersteunde netwerkprotocollen SNMP, HTTPS, POP3, IMAP
Poorten & interfaces
Aantal Ethernet LAN (RJ-45)-poorten 1
USB-poort Nee
Type behuizing Rack (1U)
Kleur van het product Black,Blue
Type koeling -
Materiaal behuizing -
LED-indicatoren Ja
Soort NAS
Apparaatklasse -
Backup-functie Ja
Back-up-eigenschappen Cloud
Aantal gebruikers 500 gebruiker(s)
Web-gebaseerd management Ja
Aan/uitschakelaar Ja
Inclusief besturingssysteem -
Gewicht en omvang
Breedte 436.88 mm
Diepte 502.92 mm
Hoogte 43.18 mm
Gewicht 9525.44 g
toon meer

Veelgestelde vragen

Hieronder vindt u de meest gestelde vragen over de Barracuda Networks Message Archiver 350.

Staat je vraag er niet tussen? Stel hier je vraag