Alcatel One Touch 536 handleiding

Alcatel One Touch 536

Bekijk hier de Alcatel One Touch 536 handleiding. Het bekijken en downloaden van deze Senioren-gsm handleiding is geheel gratis.

One Touch 536
11 12
13 14 15 16 17 18
Phone Display1.1
Key Functions
standby mode : Press this key to call defined NAME1;
Operating: enter selected menu;
standby mode : Press this key to call defined NAME2;
Operating: Press to go back to previous menu;
Press this key to enter Inbox under standby mode;
Press to call out: press to pick up phone when there is
incoming call;
Press to enter Call history under standby mode;
Move cursor left in need;
Power Off: Long press to switch on;
Power On: Long press to switch off;
Operating: Short press it to go back to standby mode; End a
call or Reject a call;
Move cursor right in need;
Press this key to enter main menu;
Press this key to move up the cursor;
FM: Increase frequency on 0,1MHz;
Press this key to enter Phone Book under standby
Press this key to move down the cursor;
FM: Decrease frequency on 0,1MHz;
Standby mode: press to type in *, +, p, w;
FM: Decrease frequency on 0,1MHz;
Editing mode: Press to select symbol;
Standby mode: Input # ;
Long press Switching to silent mode;
Editing mode: Press to switch Inputting method;
Press corresponding key to select corresponding item
of the menu;
Input numbers of 0~9 under standby mode;
FM key
Torch light ON/OFF;
Alarm Clock ON/OFF;
Volume control;
SOS key
Long press for 3 sec to activate SOS function.
Note: “Press” in this manual, means to press and release the
key; “press and hold” means to press and hold the key for at
least 2 seconds.
Icon & Symbols1.3
Icons Introductions
New Message
Ring only
Vibrate only
Vibrate and Ring
Vibrate then Ring
Getting Started
Please read the safety instructions in the "Safety Information and
Notices" section before use.
Inserting the SIM Card2.1
Insert the SIM card2.1.1
Install the battery and back cover2.1.2
Turning the phone on2.2
To turn the phone on, press and hold the End/Power Key. Enter the
PIN code if required.
Charging the Battery2.3
1. Ensure the battery is inserted in the handset. To charge the battery,
plug in the charger connector at the bottom of your phone (USB
interface) and then plug the other end into an AC power socket.
2. The battery symbol indicates the charging status. While charging, the
charge indicators will scroll. When all the scroll bars are steady, the
battery is fully charged.
3. Disconnect the charger from the phone.
4. Disconnect the charger from the AC power socket.
Note: If the battery is powerless, the battery icon will
reappear after a few minutes of charging.
Inserting a T-Flash Card2.4
1. Lift up the T-Flash card cover under of the SIN1card slot. Pull the
cover to the right if it is locked and then lift it.
2. With the metal contacts facing down, gently insert the T-Flash card
into the cover, then press the cover down.
3. Press and pull the cover to the down to lock it.
Important Password2.5
Phone lock password is 0000.
Text Entry
Input method3.1
During text editing mode, you can press the # Key to switch input
modes or press the N1 key [Options] and select Input Method to select
different input modes.
Entering Symbols: In any input mode, press the * Key to open the
symbols input screen.
English Input Mode3.2
In English input mode, you may have to press a key several times to
enter a letter from the keyboard. Press a key continuously to select
the English letter represented by the key. Press once to enter the
first letter and press twice to enter the second letter. The English
input mode includes several input methods, Smart ABC, Smart abc,
ABC, abc etc.
Numeral input mode3.3
Press corresponding number with Numeric keys 0-9.
English - CJB2410ALAAA
We continuously strive to improve our products.
Therefore, we reserve the rights to revise this user
manual or withdraw it at any time without prior notice.
N2 key
End/Power Key
Down Key
SMS key
N1 key
Dial/Answer key
Up Key
Making a call from the phonebook4.3
Access the Phone Book List, scroll to search the desired number,
to call the number.
Last Number Redial
1. In the standby mode, press
to access the Call logs.
2. Press the Up/Down key to reach the desired number or name
and press
Speed Dial4.4
If you already set the speed dial numbers, then you can long press
number key 2 to 9 to dial set numbers out under standby mode. Long
pressing number key 1 is to dial to voice mailbox if you already set
the mailbox number.
Receiving a Call4.5
Press to receive incoming call.
During a call, you can operate by pressing
Hold single call, End single
call, New call, Phone Book, Messages, Sound recorder, Background
sound, DTMF.
Press end key to end a call.
Reject a Call4.6
Press END Key or Right soft key to reject an incoming call.
Options in Call4.7
During a call, you can operate by pressing Answer key: Hold single
call, End single call, New call, Phone Book, Messages, Sound recorder,
Background sound, DTMF.
Side key to adjust volume
You can press volume key to adjust volume during the call.
Call Centre
Missed calls5.1
This menu displays received calls that you did not answer. In the
missed calls list, you can view the details of the record by pressing
the Ok key or soft key (left). In the view screen, you can Call, Delete,
Send SMS, Send MMS, Edit before call, Edit the number, or you can
execute other function, such as view the detail information of the call,
Delete all the Missed Calls.
Received calls 5.2
This menu displays the most recent 20 calls you have received.
In the list of received calls, you can view the details of the record by
pressing the Ok key or soft key (left). In the view screen, you can Call,
Delete, Send SMS, Send MMS, Edit before call, or you can execute
other function, such as view the detail information of the call, Delete
all the Received calls.
Dialed calls5.3
This menu displays that you have dialed. In the dialed calls list, you
can view the details of the record by pressing the Ok key or soft
key (left). In the view screen, you can Call, Delete, Send SMS, Send
MMS, Edit before call, Edit the number, or you can execute other
function, such as view the detail information of the call, Delete all
the Received calls.
Call timers5.4
This menu displays the time log for calls made and received. The time
of the last call’s. and by execute the “Reset all” function, you can reset
all the logs.
Call cost5.5
This network feature displays the cost of calls. This menu is available
only if your SIM card supports this feature. Note that this is not
intended to be used for billing purposes, and also you can reset the
cost record.
Message counter5.6
You can view the numbers of sent and received SMS.
GPRS counter5.7
You can view the numbers of sent or received GPRS, and also you can
reset the counter.
Phone Book
You can store phone numbers on your SIM card and in your phone’s
memory. The SIM card and phone’s memory are physically separate,
but they are used as a single entity called Phone Book.
Quick search6.1
Input the first character of the name you are searching for in the cursor,
and then all records meeting the conditions will be displayed.
Search results will be different due to different input methods.
Add new contact6.2
Use this menu to add a new contact to SIM card or phone.
Sent SMS or MMS6.3
When you select the contact, you can press the “options” key to
select the” Sent text message” or “send multimedia message
to send a SMS or MMS.
After you have search the contact you wanted, you can press the
to call the number.
View or Edit 6.5
After you have search the contact you wanted, you can view the
detailed information of the contact, or edit the information of the
You can delete the contact you selected.
Set N1 or N26.7
Select the two keys, you can set the urgency number.
Copy or Move6.8
You can copy or move the selected number form the phone to the SIM
card or from the SIM card to the phone.
Send contact6.9
You can sent the contact you selected through the SMS or MMS, and
also you can Via Bluetooth sent it.
Mark several6.10
Through the key you can mark several contacts, after doing this you can
send SMS or delete the marked numbers and so on.
The options are Preferred Look, Speed dial, My number, Extra
numbers, Memory status, Copy contacts, Move contacts, Delete all
Use this menu to keep track of your schedule. You can also use
convenient features, such as Alarm, Calendar, Notes, Calculator,
To access this menu, press [Menu] in Idle mode and select Organizer.
The mobile phone provides 1 alarm and you can set it as your need.
If you have configured an alarm, an icon indicated that you have
configured the alarm will appear. No icon will show if you don’t set an
alarm. Select “Edit” to set the current alarm.
You can view and edit the memo of a specified date with this function.
1. View: User is able to view the task which is added by user.
2. View all: View all the tasks.
3. Add event: User is able to select task type and enter Start and End
date, time.
4. Jump to Date: Skip to the specified date to view or edit the daily
arrangements of the day.
5. Delete event: you also can select delete the events.
You can save the job which you need to in the list. Select Menu )
Organizer ) Notes.
You can use this tool to help you do arithmetic operations, The
calculator can add, subtract, multiply and divide.
You should select Menu > Organizer > Bluetooth. In the Bluetooth
screen, select Power On. Next, select Search audio device if you
want to connect to an audio device or select My device > Search
new device.
When searching for a device, you are to be presented with a list of any
device discovered within the range of your Bluetooth-enabled phone.
As soon as you select a device and a connection is made, you are
prompted to enter in order to pair with the device.
You should create your own password and agree with the owner of
the other device to use the same code. Devices that do not have a
user interface have a factory-set password. Refer to its documentation
for further information.
The pass key feature ensures that only legitimate connections are
allowed to connect either to your device or to the selected device.
Establish Bluetooth connection
If the devices are paired successfully, they will be shown in the My
Device menu.
Before the connection is established, you can select files, such as
pictures and sound, press the N1 key [Options] and select Send >Via
Bluetooth, then select the paired device. The received files will be
saved in File manager > Received.
Battery saving
Features using Bluetooth technology increase the demand on battery
power and reduce the battery life.
If you do not intend to use the Bluetooth feature for some time, you
should deactivate it in order to conserve battery power.
Making a Call4.1
Note: You can make a call only when the network name
appears on the screen.
1. In idle mode, enter the phone number.
2. Press the Dial/Answer key to dial the number.
3. Press the End/Power Key to end the call.
Note: During a call, press the Volume key to adjust
the volume.
Note: In most countries, recording telephone
conversations is subject to legislation. We advise you to
notify the caller if you intend to record your conversation
and only do so if they agree.
Making an International Call4.2
1. Press the * Key twice quickly until "+" appears on the screen.
2. Enter the country code.
3. Enter the area code (normally without the 0 before it) followed by
the phone number.
4. Press the Dial/Answer key to call directly.
Bluetooth menu
Power Turn Bluetooth feature On or Off.
Visibility choose to show or hide your device by selecting
On or Off.
My device Displays the Bluetooth devices that you have
paired successfully and can connect to.
Search audio
Search for the audio devices that you can connect
with, such as BT headset.
My name show the name of your device and also you can
edit your device's name.
Audio Path: Select “Leave in Phone” or
Forward to BT Headset”.
Storage: you can set your preferred storage.
Sharing permission: Select “Full control” or
Read only”.
My address: you can view your handset address
You can configure your cellular phone to best suit your usage
User Profiles8.1
General 8.1.1
1 Activate: Open the selected mode.
2. Customize
Tone Settings: Includes Incoming Call, Power on, Power off, Cover
open, Cover close, Message, Alarm and Keypad. You can select built-in
ring tunes, or the tunes composed by yourself.
Volume: Includes the volume setting of Ringtone and Key Tone. The
volume degree is from 1 to 7.
Alert Type:
- Ring only: Just ringing, no vibration.
- Vib. only: Just Vibrating, no ringing.
- Vib. and ring: Vibrating and ringing.
- Vib. then ring: Ringing after vibration.
Ring Type:
- Single: Rings once when a call is coming.
- Repeat: Rings continuously when a call is coming.
- Ascending: Rings continuously and the volume increases gradually.
Connect notice:
- None: No ring and Vibration, It’s silent.
- Tone only: Just ringing, no Vibration.
- Vib. only: Just vibration, no ringing.
- Tone and Vib. Ringing and Vibration.
Extra tone:
- Warning: If necessary, you will be warned by the prompt tone.
- Error: You will be warned by a tone if you make a mistake.
- Camp on: A prompt tone will be heard after searching the network
Answer Mode:
- Cover answer: you can open the cover to answer.
- Any key: Press any key to answer a call (Except of Hang Up Key and
Right Soft Key).
Volume, Alert type may not set. Please refer to “general” for more
Note: Long press # key switching to silent mode.
Please refer to “general” for more details.
You can do the set if you use Bluetooth headset to answer a call, please
refer to “general” for more details.
Phone settings8.2
Time and date: Including Set home city, Set time/date, Set format,
and Auto update.
Schedule power on/off: It is to set the time when phone is power
on/off automatically.
Language: Select the desired language for the display text.
Input methods: Support input methods.
Keypad light: you can set the keypad light’s status.
SOS setting8.3
SOS SMS content: You can fix SMS to appointed contact when you
make emergency call. You can fix one SMS in this phone and you can
change the content by yourself.
SOS number: You can add emergency numbers; you can add at most
4 numbers. You can also change or delete the emergency number that
you have fixed before, or set emergency dialing status.
Voice setting8.4
Key number voice: you can set the key’s voice status, select on
or off.
Incoming number voice: if you set the status “on”, then if a call
coming, the phone will announce the coming number.
N1, N2 Settings8.5
You can set the urgency number of N1, N2.
With this function you can configure the basic status of display
characteristics including Wallpaper, Show date and time, Show owner
number, LCD backlight.
Quick Start Guide
For more information about how to use the phone, please go
to to download complete user
manual (English version only). Moreover, from the website you
can also consult FAQ (English version only).
This product meets applicable national SAR
limits of 2.0 W/kg. The specific maximum
SAR values can be found on page 27 of this
user guide.
When carrying the product or using it
while worn on your body, either use an
approved accessory such as a holster or
otherwise maintain a distance of 1.5 cm
from the body to ensure compliance with
RF exposure requirements. Note that the
product may be transmitting even if you are
not making a phone call.
Prolonged exposure to music at full volume on the
music player may damage the listener's hearing. Set
your phone volume safely. Use only headphones
recommended by TCT Mobile Limited and its
call settings8.7
SIM settings8.7.1
Include Caller ID, Caller waiting, Call divert, Call barring, Line
Caller ID
This network service informs your Caller ID to the recipient when
you call out.
You can set the following options for the Caller ID function.
Call waiting
This network service informs when someone is trying to reach you
during another call. You can specify the call waiting option for voice
calls only.
Call divert
This network service reroutes incoming calls to the number that
you specify.
Example: you may wish to divert your business calls to a colleague
while you are busy.
Call barring
This network service allows you to restrict your call for Outgoing
Calls, Incoming Calls.
You can also cancel all call barring settings. You will be able to make
and receive calls normally.
You can set and change the call barring password obtained from
your service provider using this option. You must enter the current
password before you can specify a new one.
Line switching: Switch between line 1 and 2.
Advance settings8.7.2
Call time display: if you set this function’s status “on”, then when
you making a call, the holding time will be display on you phone.
Call time reminder: if you use this function, you can have a prompt
of the holding time.
Reject by SMS: Reject a call use by SMS.
IP3769_536_QG_Eng_GB_01_120217.indd 1IP3769_536_QG_Eng_GB_01_120217.indd 1 2012-2-17 Lynn 1:12:022012-2-17 Lynn 1:12:02

Vraag over de Alcatel One Touch 536?

Wanneer u een vraag heeft over de "Alcatel One Touch 536" kunt u die hier stellen. Zorg voor een duidelijke omschrijving van uw probleem zodat andere gebruikers en/of de redactie u van een passend antwoord kunnen voorzien.

Hoe moet ik bij de Alcatel ome touch 536 de Bluetooth uitschakelen? Ik heb in mijn menu niet de optie extra!

Lies boon, 2 jaar geleden

Hoe moet ik bij de Alcatel ome touch 536 de Bluetooth uitschakelen? Ik heb in mijn menu niet de optie extra!

Lies boon, 2 jaar geleden

*correctie vorig bericht Wel willen dat de alarm knop een sms stuurt ipv dat de alarmknop naar de alarmnummers belt. Hoe kunnen wel dat instellen? In het begin heeft ie het wel gedaan maar er is niks in de instellingen te vinden. Kunnen jullie ons hiermee helpen? Mvg Nico

Nico, 3 jaar geleden

Op mijn alcatel one touch 536 kan ik de nederlandse taal niet instellen, wel in het negles, duits, frans, deens,... Hoe kan ik op een of andere wijze de nederlandse taal instellen? Dank. Mathieu

Mathieu Neyens, 4 jaar geleden

ik heb een senior mobiel tel . maar inkomende bel toon komt zeer zachtjes over hoor hem nauwelijks hoe krijg ik bel toon harder voor de rest ben ik zeer tevreden

john jaspers, 5 jaar geleden

Hoe kan ik een ander beltype instellen

Van bree, 5 jaar geleden

Wel willen dat de alarm knop een sms stuurt op naar de alarmnummers belt. Hoe kunnen wel dat instellen? In het begin heeft ie het wel gedaan maar er is niks in de instellingen te vinden. Kunnen jullie ons hiermee helpen? Mvg

Nn, 3 jaar geleden

Koop gerelateerde producten:

Product specificaties

Beeldschermdiagonaal   2.4
Resolutie   240 x 320
Touchscreen no
Beeldscherm type TFT
Beeldscherm, aantal kleuren 65536 kleuren
Extern beeldscherm no
Flash card support yes
Compatibele geheugenkaarten microSD (TransFlash)
Intern geheugen   -
Maximale capaciteit van de geheugenkaart 16
Camera achterzijde -
Wi-Fi no
Datanetwerk GSM
2G bands (primary SIM) 900, 1800 MHz
SIM-kaart-capaciteit -
Bluetooth   yes
Bluetooth-versie 2.1+EDR
MMS   yes
E-mail yes
Video call no
FM-radio yes
Type ringtone MP3
Energie-opslagtechnologie accu/batterij   Lithium-Ion (Li-Ion)
Capaciteit van de accu/batterij 850 mAh
Accu/Batterij oplaadtijd   3
Gesprekstijd (2G) 3
Standby time (2G) 200
Gewicht en omvang
Gewicht   123 g
Breedte 50 mm
Diepte 16.5 mm
Hoogte   105 mm
Technische details
Abonnementstype -
Kleur van het product Zwart
Volumeregeling Digitaal
Vormfactor   Clamshell
Persoonlijke informatie management Alarm clock, Calculator, To-do list
Java-technologie yes
Trilalarm yes
GPS no
Locatie positie no
Microfoon mute yes
Overige specificaties
Interface   USB
Verbinding met pc yes